EasyManuals Logo

QNAP QTS 4.5 Series User Manual

QNAP QTS 4.5 Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Task User Action
Change password a.
Under Action, click .
The Change Password window appears.
b. Specify a password that meets the requirements.
c. Verify the password.
d. Click Change.
Edit user properties a.
Under Action, click .
The Edit User Properties window appears.
b. Edit the user properties.
For details, see Creating a Domain User.
c. Click Finish.
Edit user group membership a.
Under Action, click .
The Edit User Groups wizard appears.
b. Select or deselect user groups.
For details, see Domain User Groups.
c. Click Next.
d. Review the summary, and then click Finish.
Edit user profile a.
Under Action, click .
The Edit User Profile window appears.
b. Specify the following:
• Profile path
Specify the shared folder where the roaming profiles are stored.
• Login script
Specify the login script that executes when a domain user logs in
from a computer member of the domain.
To directly specify the script filename, connect to \NAS\netlogon
using the domain administrator account and copy the script to the
\sysvol shared folder in the \scripts folder of your domain.
• Home Folder
Specify the drive and shared folder that is mapped to the drive
when the domain user logs in to the domain.
• Click Finish.
Tip
You can also edit quota settings for domain users. For details, see Editing Quota Settings.
Deleting Domain Users
1. Go to Control Panel > Privilege > Domain Controller > Users .
2. Select the domain users to delete.
QTS 4.5.x User Guide
Privilege Settings 111

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP QTS 4.5 Series and is the answer not in the manual?

QNAP QTS 4.5 Series Specifications

General IconGeneral
Operating SystemQTS 4.5 (Based on Linux)
File SystemEXT4
Supported RAID LevelsRAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking ProtocolsTCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management InterfaceWeb-based GUI
Supported ProtocolsSMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot SupportYes
Virtualization SupportYes
Backup SolutionsHybrid Backup Sync
Security FeaturesAES 256-bit encryption, Antivirus, IP Blocking
Mobile AppsQfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage CapacityVaries by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.

Related product manuals