EasyManuals Logo

QNAP QTS 4.5 Series User Manual

QNAP QTS 4.5 Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Task User Action
Add a scheduled action.
Note
One schedule is shown by default.
a. Click Add.
b. Select the following.
• Action: Select whether you want to shut down, restart, or
turn on the NAS.
• Schedule Type: Select the frequency of the action.
• Hour and Minute: Select the time of day to perform the
action.
Remove a scheduled action. Click Remove.
Note
Schedules are removed starting from the bottom.
4. Optional: Select Postpone scheduled restart/shutdown when a replication job is in progress.
5. Click Apply.
Firmware Update
QNAP recommends keeping your NAS firmware up to date. This ensures that your NAS can benefit from
new QTS software features, security updates, enhancements, and bug fixes.
You can update NAS firmware using one of the following methods:
Update Method Description
Using Live Update Firmware updates are automatically detected by
QTS and installed onto your device.
For details, see Checking for Live Updates.
Using Manual Update You can check for latest device firmware updates on
the QNAP website, download the firmware update to
a computer, and manually install the firmware update
onto your device.
For details, see Updating the Firmware Manually.
Using QFinder Pro If your device is connected to the local area network,
you can use QFinder Pro to check and install the
latest firmware updates.
For details, see Updating the Firmware Using
Qfinder Pro.
Firmware Update Requirements
Your device must meet the following requirements to perform a firmware update:
QTS 4.5.x User Guide
System Settings 45

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP QTS 4.5 Series and is the answer not in the manual?

QNAP QTS 4.5 Series Specifications

General IconGeneral
Operating SystemQTS 4.5 (Based on Linux)
File SystemEXT4
Supported RAID LevelsRAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking ProtocolsTCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management InterfaceWeb-based GUI
Supported ProtocolsSMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot SupportYes
Virtualization SupportYes
Backup SolutionsHybrid Backup Sync
Security FeaturesAES 256-bit encryption, Antivirus, IP Blocking
Mobile AppsQfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage CapacityVaries by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.

Related product manuals