7. iSCSI & Fibre Channel
iSCSI & Fibre Channel is a QTS utility that enables you to configure iSCSI and Fibre Channel storage
settings on your NAS.
Storage Limits
iSCSI Storage Limits
iSCSI Storage Limit Maximum
iSCSI LUNs and targets per NAS 255 (combined)
Connections per iSCSI session 8
iSCSI sessions per target The maximum number of sessions is determined by
available NAS CPU resources, memory, and network
bandwidth.
iSCSI sessions per NAS The maximum number of sessions is determined by
available NAS CPU resources, memory, and network
bandwidth.
Fibre Channel Storage Limits
Fibre Channel Storage Limit Maximum
Fibre Channel ports + port groups 256 (combined)
WWPN aliases 256
LUN masking rules 256
Port binding rules 256
LUNs mapped to 1 Fibre Channel port 256
iSCSI & Fibre Channel Global Settings
You can access global settings by clicking
in the iSCSI & Fibre Channel window.
Setting Description
Enable iSCSI and Fibre Channel services Enable these services to use iSCSI and Fibre
Channel on your NAS.
iSCSI service port View and modify the port that iSCSI initiators
connect to.
Tip
The default port is 3260.
Enable iSNS SNS enables the automatic discovery and
management of iSCSI initiators and targets within a
TCP/IP network.
iSNS server IP: Specify the IP address of the iSNS
server.
LUNs
QTS 4.5.x User Guide
iSCSI & Fibre Channel 302
To Next Page
Loading...
Need help?
General
