QNAP QTS 4.5 Series User Manual

Important
MIBs describe the structure of the management data of a device subsystem. They use a
hierarchical namespace containing object identifiers (OID). Each OID identifies a variable
that you can read or set using SNMP. You must assign the correct OID to retrieve the NAS
information. The default OID for QNAP NAS devices is 1.3.6.1.4.1.24681.2.
Downloading the SNMP MIB
1. Go to Control Panel > Network & File Services > SNMP .
2. Under SNMP MIB, click Download.
QTS downloads the NAS.mib file on your computer.
Service Discovery
UPnP Discovery Service
Universal Plug and Play (UPnP) is a networking technology that enables the discovery of networked devices
connected to the same network. After enabling this service, devices supporting UPnP can discover the NAS.
Enabling the UPnP Discovery Service
1. Go to Control Panel > Network & File Services > Service Discovery > UPnP Discovery Service .
2. Select Enable UPnP Discovery Service.
3. Click Apply.
Bonjour
Bonjour is a networking technology developed by Apple that enable devices on the same local area network
to discover and communicate with each other.
Enabling Bonjour
1. Go to Control Panel > Network & File Services > Service Discovery > Bonjour .
2. Select Enable Bonjour Service.
3. Select the services to be advertised by Bonjour.
Important
You must enable the services in QTS before advertising them with Bonjour.
4. Click Apply.
FTP
The NAS FTP service helps optimize FTP data transfer. To use the service, you must configure the settings
and then connect the NAS to an FTP client such as FileZilla.
Configuring FTP Settings
1. Go to Control Panel > Network & File Services > FTP Service .
2. Select Enable FTP Service.
QTS 4.5.x User Guide
Network & File Services 448

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English