QNAP QTS 4.5 Series User Manual

3. Perform one of the following actions.
Action Steps
Use the toolbar a. Select the file.
b.
Click .
c. Select Edit with Office Online.
Use the context menu Right-click the file and then select Edit with Office
Online.
File Station opens the file in Microsoft Office Online.
Opening Image Files Using Image2PDF
You must to install Image2PDF from the App Center before starting this task.
1. Opening File Station
2. Locate the file.
3. Perform one of the following methods.
Method Steps
Use the menu bar a. Select the file.
b.
Click .
c. Select Open with Image2PDF.
Use the context menu Right-click and then select Open with
Image2PDF.
File Station opens the selected image file with the Image2PDF wizard.
Follow the wizard's on-screen instructions to convert the image file into a PDF file.
Viewing File Properties
1. Open File Station.
2. Locate the file.
3. Perform one of the following actions.
Action Steps
Use the toolbar a. Select the file.
b.
Click .
c. Select Properties.
Use the context menu a. Right-click the file.
b. Select Properties.
QTS 4.5.x User Guide
File Station 131

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.