QNAP QTS 4.5 Series User Manual

Configuring Fibre Channel Port Binding
1. Go to iSCSI & Fibre Channel > Fibre Channel > FC Ports .
2. Select a Fibre Channel port.
3. Click Action, and then select Edit Port Binding.
The Fibre Channel Port Binding window opens.
4. Add one or more initiator WWPNs to the LUN's authorized initiators list.
Method Steps
Add from WWPN list a. Select one or more initiator WWPNs in the
WWPN list.
b. Click Add.
Add WWPNs as text a. Specify one WWPN per line using any of the
following formats:
•
XXXXXXXXXXXXXXXX
•
XX:XX:XX:XX:XX:XX:XX:XX
b. Click Add.
5. Optional: Select Add unknown WWPNs to the FC WWPN Aliases List.
When selected, QTS will add any unknown WWPNs to the list of known aliases. To view the list, go to
iSCSI & Fibre Channel > Fibre Channel > FC WWPN Aliases .
6. Click OK.
FC Storage
The FC Storage screen displays the LUN and Fibre Channel port group mappings.
Fibre Channel LUN Masking
LUN masking is a security feature that enables you to make a LUN visible to some Fibre Channel initiators
and invisible to other initiators.
Configuring Fibre Channel LUN Masking
1. Go to iSCSI & Fibre Channel > Fibre Channel > FC Storage .
2. Select a LUN.
Important
The LUN must be disabled.
3. Click LUN Masking.
The LUN Masking window opens.
4. Add one or more initiator WWPNs to the LUN's authorized initiators list.
QTS 4.5.x User Guide
iSCSI & Fibre Channel 322

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.