Filter User Action
Category name a. Type a category.
b. Press ENTER.
Console Management filters all system logs according to the specified
category.
A list of system logs appear.
Tip
To browse your applications, type n or p and press enter to go to the next or previous page.
Showing Network Settings
1. Log in to Console Management as the admin account, and then type 1 and press ENTER.
Note
Network settings appear in the following format: adapter, virtual switch, status, IP, mac address.
The Network settings window appears.
Restoring or Reinitializing the NAS
1. Log in to Console Management as the admin account, and then type 3 and press ENTER.
The Reset window and five options appear.
2. Type the alphanumeric character corresponding with the action you want to perform, and then press
ENTER.
Note
The admin password is required to reset the settings or reinitialize the NAS.
Alphanum
eric
Character
Option User Action
1 Reset network settings a. Type 1.
b. Press ENTER.
Console Management resets the network settings.
2 Reset system settings a. Type 2.
b. Press ENTER.
Console Management restores system settings to
default without erasing user data.
3 Restore factory defaults & format all
volumes
a. Type 3.
b. Press ENTER.
Console Management restores the system settings
to default and formats all disk volumes.
QTS 4.5.x User Guide
Console Management 573
To Next Page
Loading...
Need help?
General
