QNAP QTS 4.5 Series User Manual

2. Locate the folder.
3. Perform one of the following actions.
Action Steps
Use the toolbar a. Select the folder.
b.
Click .
c. Select Storage Info.
Use the context menu a. Right-click the folder.
b. Select Storage Info.
The Storage Info window opens and displays the following information.
Information Description
Shared folder Displays the names of shared folders.
Used size Displays the total storage size currently in use.
Volume Displays the volume name.
Capacity Displays the total storage capacity of the shared folder.
Free size Displays the total available storage space in the shared folder.
Volume status Displays the volume status.
4. Click Close.
Modifying Folder Permissions
This task requires that you enable advanced folder permissions in Control Panel > Privilege > Shared
Folders > Advanced Permissions .
1. Open File Station.
2. Locate the folder.
3. Perform one of the following actions.
Action Steps
Use the toolbar a. Select the folder.
b.
Click .
c. Select Properties.
Use the context menu a. Right-click the folder.
b. Select Properties.
The Properties window opens.
4.
Click
.
QTS 4.5.x User Guide
File Station 154

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.