Restoring System Settings
Warning
If the selected backup file contains user or user group information that already exists on
the NAS, QTS will overwrite the duplicate information.
1. Go to Control Panel > System > Backup/Restore > Backup/Restore Settings .
2. Click Browse.
3. Select a valid BIN file that contains the QTS system settings.
4. Click Restore.
System Reset and Restore to Factory Default
QTS provides several options for resetting or restoring the NAS to its default state.
Important
QNAP recommends backing up your data before performing this task.
QTS 4.5.x User Guide
System Settings 50
To Next Page
Loading...
