QNAP QTS 4.5 Series User Manual

• Allow the NAS to enter auto-protection
mode after the power fails for a
specified time period
3. Click Apply.
System Status
You can check the status of your NAS in Control Panel > System > System Status .
Section Description
System Information This screen displays basic system information
including, server name, model name, CPU, Intel
QuickAssist Technology (Intel QAT) support, serial
number, BIOS version, memory, firmware version,
system up time, time zone, and filename encoding.
Note
Intel QuickAssist Technology support
only appears when it is detected by
QTS.
Network Status This screen displays the current network settings of
each network interface.
System Service This screen displays the current status of system
services, such as antivirus, networking services,
DDNS services, domain controllers, multimedia
management, data backup management,
surveillance management, remote servers, and VPN
servers.
Hardware Information This screen displays NAS hardware information,
such as CPU usage, memory, disk temperature,
power supply unit (PSU) status, and system fan
speed.
Resource Monitor
You can monitor the status of your NAS in Control Panel > System > Resource Monitor .
Resource Monitor displays information and statistics about hardware usage and system resources.
Section Description
Overview This screen provides a general summary of CPU
usage, memory usage, network usage, and ongoing
processes on the NAS.
QTS 4.5.x User Guide
System Settings 56

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English