Virtual Switch DHCP Client
Virtual switches allow virtual machines to obtain IP-related configurations automatically from an external
DHCP server. The virtual switch obtains the IP address from the DHCP server through the connected
physical adapter on the device.
Note
1. A virtual switch configured with an automatic DHCP IP address cannot utilize the NAT
and DHCP server functions.
2. Virtual switches cannot automatically acquire the IP address of the physical adapter
unless the virtual switch has been configured to connect to a physical adapter in
Virtual Switch > Basic Mode/Advanced Mode .
RADVD
This screen controls the creation and management of Router Advertisement Daemon (RADVD) servers. This
service sends messages required for IPv6 stateless auto-configuration. This service periodically sends router
advertisement (RA) messages to devices on the local network, and can also send a router solicitation
messages when requested from a connected node.
Creating an RADVD Server
1. Go to Control Panel > Network & File Services > Network & Virtual Switch .
The Network & Virtual Switch window opens.
2. Go to Network > DHCP Server .
3. Go to the RADVD tab.
4. Click Add.
The RADVD - Outgoing Interface window opens.
QTS 4.5.x User Guide
Network & Virtual Switch 434
To Next Page
Loading...
Need help?
General
