QNAP QTS 4.5 Series User Manual

The Edit Shared Folder Permission window appears.
4. Edit the computer account's permissions for each shared folder.
For details, see Shared Folder Permissions.
5. Click Apply.
Deleting Computer Accounts
1. Go to Control Panel > Privilege > Domain Controller > Computers .
2. Select the accounts to delete.
Note
The host computer account cannot be deleted.
3. Click Delete.
A warning message appears.
4. Click Yes.
DNS
The Domain Name System (DNS) helps the domain controller locate services and devices within the domain
using service and resource records. Two DNS zones are created by default: the domain created when
setting up the NAS as a domain controller, and a zone called "_msdcs". System administrators can modify
DNS settings and add or delete domains and records.
Modifying DNS Settings
1. Go to Control Panel > Privilege > Domain Controller > DNS .
2. Log in under the domain administrator account.
Note
This is the account created when enabling the domain controller.
a. Specify the following information.
Field Description
Account Enter administrator.
Password Enter the password specified when the account was
created.
b. Click Login.
3. Under DNS Settings, select a domain.
A list of records appears.
4. Select a record.
The properties panel appears.
5. Modify any of the following.
Field Description
Name Edit the name of the record.
QTS 4.5.x User Guide
Privilege Settings 115

QNAP QTS 4.5 Series Specifications

General

Operating System	QTS 4.5 (Based on Linux)
File System	EXT4
Supported RAID Levels	RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, JBOD, Single
Networking Protocols	TCP/IP, IPv4, IPv6, SMB, NFS, AFP, FTP, SFTP, HTTP, HTTPS, iSCSI
Management Interface	Web-based GUI
Supported Protocols	SMB/CIFS, NFS, FTP, SFTP, WebDAV, AFP, iSCSI
Snapshot Support	Yes
Virtualization Support	Yes
Backup Solutions	Hybrid Backup Sync
Security Features	AES 256-bit encryption, Antivirus, IP Blocking
Mobile Apps	Qfile, Qmanager, Qphoto, Qmusic, Qvideo, Qnotes, Qcontactz
Maximum Storage Capacity	Varies by model. Dependent on the number of drive bays and the maximum capacity of individual drives supported.