QNAP QTS 4.5 Series User Manual

Button Task User Action
Send a test message.
Click .
Start sending push notifications to
the device or browser.
Click .
Stop sending push notifications to
the device or browser.
Click .
Unpair and remove the device or
browser.
1.
Click .
A confirmation message appears.
2. Click Confirm.
Pairing Notification Center with a Mobile Device
Before pairing, ensure the following.
• Your NAS is registered to an active myQNAPcloud account.
• Qmanager is installed on the mobile device.
• Your NAS is added in Qmanager.
1. Open Qmanager on the mobile device.
2. Perform one of the following.
Pairing Option User Action
Automatic pairing a. From the device list, click the NAS you want to pair.
A confirmation message appears.
b. Click Confirm.
Manual pairing a.
Identify your NAS from the device list, and then click .
The device settings screen appears.
b. Select Push notifications.
c. Click Save.
A confirmation message appears.
d. Click Confirm.
Notification Center pairs with the mobile device.
3. In Notification Center, go to Service Account and Device Pairing > Push Service .
4. Verify that the mobile device appears in the list of paired devices.
Pairing Notification Center with a Web Browser
Before pairing, ensure the following.
• Your device is registered to an active myQNAPcloud account.
• You are using one of the following web browsers: Google Chrome, Internet Explorer, Firefox, or Safari.
QTS 4.5.x User Guide
Notification Center 547

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English