Chapter 4 Configuring Your Library
Running the Setup Wizard
Scalar i2000 User’s Guide 103
• Configuring Library Security on page 186
• Using LDAP on page 192
• Configuring Screen Saver Preferences on page 195
• Working With Data Path Conditioning on page 198
This chapter also includes information about installing the Host
Registration Service (HRS). See
Working With Data Path Conditioning on
page 198.
For a brief overview of the LMC, see Library Management Console (LMC)
on page 349.
If you are configuring your library for the first time, see the Scalar i2000
Installation Guide for information about performing an initial library
configuration.
Running the Setup Wizard
Use the Setup Wizard command to initially configure important settings
on a library as part of the normal installation procedure. Before you can
manage your library from a remote LMC client, you must initially
configure the library from its touch screen by either running the Setup
Wizard command or using individual configuration commands from the
Setup menu. For detailed information about initially configuring the
library, see the Scalar i2000 Installation Guide.
Only one administrator can be logged on and
performing library configuration at any one time.
If another administrator attempts to log on, a
message appears, warning that only one
administrator at a time is permitted on the library.
If a service user logs on while an administrator or
regular users are logged on already, the library
automatically logs off those users.
To Next Page
Loading...
Need help?
General