Chapter 6 Running Your Library
Understanding Location Coordinates
Scalar i2000 User’s Guide 376
I/O Blade Locations 6
The LMC displays I/O blade locations in parenthetical format. For
example, see the Connectivity dialog box in
figure 45. The location for the
first I/O blade listed in the Connectivity dialog box is reported as
(1,1,1,1,3). The location coordinates see aisle, module, rack, cluster, and
bay. By reading the numbers backwards, you can determine that the
location of the I/O blade is in bay 3 of the control module’s I/O
management unit. In
figure 46 on page 377, its bay (1,1,1,1,3) is shaded
gray.
Figure 45 I/O Blade Location
Coordinates
I/O blade location
coordinates
To Next Page
Loading...
Need help?
General