Chapter 2 Troubleshooting Your Library
Working With Command History Logs
Scalar i2000 User’s Guide 75
Mailing and Saving Logs2
The Send button on the log-list view of the Command History Log dialog
box enables you to send logs to e-mail addresses. If you are accessing the
LMC from a remote client, Send also enables you to save the information
to a file.
1 From the log-list view of the Command History Log dialog box, click
a log file to highlight it, and then click Send.
The Email, Save or Print Table dialog box appears.
2 Perform one of the following tasks:
• To indicate that you want to send the log as an e-mail message to
a recipient, select Email, and then either type an e-mail address
in the Email text box or select an existing address from the drop-
down list. You can type a comment in the Comment text box to
send with the log.
• To indicate that you want to save the log, select Save, and then
either type in the Save text box a path and a file name to which
you want the information saved or click Browse to specify a
location and a file name.
• You can mail or save logs from a remote client.
However, you cannot save logs from the
library’s touch screen.
• Before you perform the following procedure,
you must make sure that e-mail is appropriately
configured in the LMC so that the library can
send logs to the recipient. For more information
about configuring e-mail, see the Scalar i2000
User’s Guide.
To Next Page
Loading...
Need help?
General