Chapter 5 Maintaining Your Library
Maintenance Actions
Scalar i2000 User’s Guide 238
Performing Library Operations 5
To access available library operations for a specific drive or slot, you can
either click on Menu or right click on the drive or slot. You can perform the
following operations, depending on what library view you are using. See
Selecting a Library or Partition if you need more information on viewing
the library.
•Drive Details
•Inventory
• Loading Drives
• Unloading Drives
•Move Media
• Importing Cartridges
• Exporting Cartridges
4 To return to the Library Explorer dialog box, click Close.
The Library Explorer dialog box appears.
Configuring and Testing
Drives 5
The Drives dialog box enables you to do the following:
• Set speed and connection parameters
• Reset drives
•Cycle power to drives
• Take drives online or offline
• Identify drives
• Run a pass/fail test for LTO-type drives
• Eject tape cartridges from drives
• Send the logs by e-mail or save drive logs
• Clean drives
To Next Page
Loading...
Need help?
General