Chapter 5 Maintaining Your Library
Monitoring the Library
Scalar i2000 User’s Guide 204
• Cleaning a Drive on page 246
• Working With Connectivity on page 248
• Capturing Snapshots on page 250
• Teaching the Library (Configuration and Calibration) on
page 253
• Saving and Restoring Library Configuration on page 256
• Viewing the Drive Resource Utilization Reports on page 265
• Setting Up Advanced Reporting Options on page 269
• Working With Verification Tests on page 275
• Verification Test Graphical Reports on page 284
• Verification Test Logs on page 302
• Running the Verification Tests on page 304
• Using the Partitions Defragmentation Tool on page 328
• Cycling Library Power on page 332
• Removing a Cartridge From a Drive on page 332
Monitoring the Library
The library can provide detailed information about the status of the library
and its various components. You also can access statistics about the library
and other helpful information, such as library and component serial
numbers, port numbers, World Wide Names (WWNs), IDs, and firmware
versions.
This section explains how to use Monitor menu commands to display
status information for the following general areas:
•System
•Drives
• Connectivity
• I/E stations
To Next Page
Loading...
Need help?
General