Chapter 5 Maintaining Your Library
Monitoring the Library
Scalar i2000 User’s Guide 221
Filtering Media From the Status List 5
You can specify the media that you want to appear in the status list by
selecting media ID and media type criteria from the Filter area of the
Media Status dialog box.
1 Use one or both of the following elements to specify the media that
you want to appear in the status list:
• To specify a media item by media ID, type the exact barcode that
is associated with a particular cartridge in the Media ID text box.
You also can use the asterisk (*) as a wildcard character to
represent one or more characters in the media ID. This will list all
media for IDs that match the designated pattern. For example, if
you set the Media ID value to “J00*”, any media with IDs that
start with “J00” will appear in the status list.
• To specify media by media type, click All or a specific media type,
such as LTO, from the Slot Type drop-down list. Only media types
that are currently used in the library appear in the drop-down list.
The default is set to All.
2 Click Show.
Monitoring Sensor
Status 5
The Sensor Status dialog box displays detailed information about the
library’s power and cooling systems, such as operational statuses,
temperatures, voltages or wattages, and fan speeds in rotations per
minute (RPM). You can perform the following procedures while viewing
either the physical library or a partition.
Accessing the Sensor Status Dialog Box 5
•Click Monitor→ Sensor.
The Sensor Status dialog box appears with the Cooling Fan tab displayed.
To Next Page
Need help?
General