Chapter 4 Configuring Your Library
Configuring Library Security
Scalar i2000 User’s Guide 187
Configuring Access for
Network Services 4
The Services tab on the Security Configuration dialog box enables you to
entirely prevent all external access to the library or allow access according
to other security settings on the Security Configuration dialog box. It
also enables you to allow or prevent access by iLink services, such as
Secure Shell (SSH), and to allow or prevent external attempts to discover
the library by pinging it.
1 Click the Services tab on the Security Configuration dialog box.
2 You can change the security settings for any of the following items:
• Network Interface — To entirely prevent all external access to
the library through the MCB Ethernet port, regardless of other
settings on the Security Configuration dialog box, select
Disable. To allow external access to the library in accordance
with other security settings on the Security Configuration dialog
box, select Enable. (The Network Interface option is unavailable
when accessing the LMC remotely.)
• iLink Services — To prevent iLink services, such as Secure Shell
(SSH), from accessing the library, select Disable. To allow them
to access the library, select Enable. (iLink services are enabled by
default.)
To Next Page
Loading...
Need help?
General