Chapter 6 Running Your Library
Logging On and Off
Scalar i2000 User’s Guide 340
Logging Off From the
Touch Screen (Local
Client) 6
1 Select Operations→ Log Off or select the Log Off button on the
toolbar.
2 A message appears that asks you whether you are sure that you want
to log off. Select Yes.
The Scalar i2000 Logon dialog box appears.
Logging On From the
LMC Applet (Web
Browser) 6
The LMC Java applet lets you access all features of the LMC from a host
computer using a standard web browser. To use the LMC applet, the host
computer must have network access to the library, and you must know
the IP address of the library.
Software Requirements 6
Before logging on from the LMC applet, make sure the host computer
meets the following software requirements:
• Web Browser – Microsoft Internet Explorer 6.0 or higher, Mozilla
Firefox 1.0.6 or higher
• Java Plug-in – Java Plug-in 1.4 or higher
For information on downloading the Java Plug-in contact:
www.quantum.com/support
If you do not know the IP address of the library,
log on to the library using the touch screen. Click
Setup→ Network Configuration, and then write
down the value in the IP Address field.
To Next Page
Loading...
Need help?
General