Chapter 6 Running Your Library
Logging On and Off
Scalar i2000 User’s Guide 342
4 Click OK.
Logging Off From the
LMC Applet (Web
Browser) 6
1 Click Operations→ Log Off, or click the Log Off button on the
toolbar.
A message appears asking if you are sure you want to log off.
2 Click Yes.
The Scalar i2000 Logon dialog box appears.
3 To close the LMC applet, click Cancel.
Logging On From a
Remote Client 6
1 On the Windows taskbar on the host computer, click the Start button,
and then click Programs→ ADIC
Management Console→ Client.
If you are logging on to the library for the first time
using the default administrator account (admin),
type password. After you log on, the library
prompts you to change the default admin
password. You must enter and confirm a new
password. Passwords that are most secure include
a combination of letters, numbers, and non-
alphanumeric characters. Passwords must be eight
or more characters in length. The word
“password” is not available for use.
After logging on, do not close the web browser
window or use it to navigate to another URL.
Doing so will close the LMC applet but might leave
the current session active.
To Next Page
Loading...
Need help?
General