Quantum Scalar i2000

Installing a Remote Client
Scalar i2000 User’s Guide 427
2 Unzip the downloaded file to extract the installer.
3 Double-click the installer to start the installation program.
4 The InstallAnywhere wizard starts and guides you through the
installation.
5 When you are prompted to choose an installation set, select Client
Only.
6 Complete the InstallAnywhere wizard and click Done.
To launch the AMC client, on the Windows Start menu, click All
Programs→ ADIC Management Console→ Client.
Installing the Client on a
UNIX System 2
The UNIX clients can run with Solaris, Linux, HP-UX, or AIX.
1 Download the AMC application installer from:
http://www.quantum.com/support
Make sure to download the version of the client software that is
compatible with:
• The library software version currently installed in the library.
• The hardware platform and operating system version of the host
computer.
See http://www.quantum.com/support for information about hardware
and software compatibility.
2 Unzip the downloaded file to extract the folder containing the
installer image file.
3 Open the unzipped folder and copy the image file inside to a
temporary folder on the host.