Chapter 6 Running Your Library
Library Management Console (LMC)
Scalar i2000 User’s Guide 363
Table 29 describes the areas on the library information panel.
Table 29 Areas on the Library
Information Panel
Area Description
Name The name of the current library. The type of library appears first (Physical Library
or Partition), followed by the name of the library.
Activity The current activity for the current library.
Date The current date. The date that appears reflects user settings, but the system
operates according to Greenwich Mean Time (GMT).
Time The current time. The time that appears reflects user settings, but the system
operates according to GMT.
Data Transfer The bar graph compares the amount of data read and written over the past 24
hours. The library compiles and displays the data when a cartridge is ejected. The
units reported appear beside the graph.
Slots Utilized This graph shows the percentage of occupied media slots in the library or
partition, depending on the current view. The number of used media slots
appears beneath the graph (occupied slots/total number of storage slots).
Mounts The bar graph reports mount statistics compiled during the past 24 hours. The
library updates this information every five minutes.
Configuration Information in this area includes:
• Number of tape drives in the physical library or partition, depending on the
current view
• Types of drives (for example, LTO2) in the physical library or partition, depending
on the current view
• Total number of licensed storage slots (appears only in the physical library view)
• Total number of storage slots in the physical library or partition, depending on the
current view
• Library type (Scalar i2000)
To Next Page
Loading...
Need help?
General