Scalar i2000 User’s Guide 203
Chapter 5
5Maintaining Your Library
The library includes advanced system monitoring and alerting
mechanisms that inform you of library status and issues. It provides you
with status information about various library subsystems and
components. It also notifies you of issues it detects and guides you
through diagnosing and correcting issues before problems interfere with
backups.
This chapter describes commands that you can select from the Monitor
and Tools menus to monitor the library, configure and test drives, work
with connectivity, capture snapshots, update library software and drive
firmware, run the Teach feature to calibrate and configure the robot, save
and restore library configurations, and run tests to verify successful FRU
removals and replacements and verify successful library installations and
configurations.
This chapter consists of the following sections:
• Monitoring the Library on page 204
• Maintenance Actions on page 232
• Using Library Explorer on page 234
• Configuring and Testing Drives on page 238
The Tickets command on the Tools menu displays
tickets that the library created when it detected
issues within its subsystems. For more information
about tickets, see
Troubleshooting Your Library on
page 6.
To Next Page
Loading...
Need help?
General