Chapter 7 Working With Cartridges and Barcodes
Managing Media
Scalar i2000 User’s Guide 413
The parameters used to define a cartridge are media ID (barcode) and
location. Location is defined as a series of coordinates representing the
aisle, module, rack, section, column, and row where a cartridge is located.
See
Understanding Location Coordinates on page 366.
The Select Media area shows the full slots.
5 Click the destination drive to receive the media to highlight it. The
Select Drive area is populated with empty drives.
You can select only one drive at a time.
6 To load the data cartridge into the selected drive, click OK.
Unloading Drives 7
The Unload Drives dialog box enables you to rewind the cartridge in the
drive, eject it, and return it to storage.
1 Make sure that you are viewing the partition from which you want to
unload drives. From the View menu, click the name of the
appropriate partition.
2 Click Operations→ Drives→ Unload.
The Unload Drives dialog box appears.
3 If you want to display media IDs by media type, click the appropriate
media type from the Media Type drop-down list.
4 Click the drive you want to unload to highlight it. You can only
unload one drive at a time.
To Next Page
Loading...
Need help?
General