R&S ZNL Series User Manual

General instrument setup
R&S
®
ZNL/ZNLE
122User Manual 1178.5966.02 ─ 20
Date and Time.............................................................................................................123
Front Panel..................................................................................................................123
Mini Front Panel..........................................................................................................123
Toolbar
The toolbar provides access to frequently used functions via icons at the top of the
screen. Some functions, such as zooming, finding help, printing screenshots or storing
and loading files are not accessible at all without the toolbar.
Remote command:
DISPlay:TBAR[:STATe] on page 609
Status Bar
The status bar beneath the diagram indicates the global instrument settings, the instru-
ment status and any irregularities during measurement or display.
Some of the information displayed in the status bar can be queried from the status reg-
istry via remote commands.
Remote command:
DISPlay:SBAR[:STATe] on page 609
Softkey Bar
Softkeys are virtual keys provided by the software. Thus, more functions can be provi-
ded than can be accessed directly via the function keys on the device.
The functions provided by the softkeys are often also available via dialog boxes. How-
ever, some functions are not accessible at all without the softkey bar.
The softkey bar can be hidden temporarily to provide more space for the result dis-
plays on the screen, see Chapter 7.6.2, "User Interface tab", on page 141.
Note: The softkey bar is hidden while the SmartGrid is displayed and restored auto-
matically when the SmartGrid is closed.
Remote command:
DISPlay:SKEYs[:STATe] on page 609
Channel Bar
The channel setup bar provides information on firmware and measurement settings for
a specific channel setup.
Remote command:
DISPlay:ANNotation:CBAR on page 608
Diagram Footer (Annotation)
The diagram footer beneath the diagram contains information on the x-axis of the dia-
gram display, such as:
●
The current center frequency and span settings
●
The displayed span per division
●
The number of sweep points
Remote command:
DISPlay:ANNotation:FREQuency on page 608
Display settings

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English