R&S ZNL Series - Page 583

Command reference
R&S
®
ZNL/ZNLE
583User Manual 1178.5966.02 ─ 20
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
MMEM:SEL:HWS ON
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL <State>
MMEMory:SELect[:ITEM]:LINes:ALL <State>
This command includes or excludes all limit lines (active and inactive) when storing or
loading a configuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:LIN:ALL ON
MMEMory:SELect:CHANnel[:ITEM]:NONE
MMEMory:SELect[:ITEM]:NONE
This command does not include any of the following items when storing or loading a
configuration file.
●
Hardware configuration: MMEMory:SELect[:ITEM]:HWSettings on page 582
●
Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL on page 583
●
Spectrogram data: MMEMory:SELect[:ITEM]:SGRam on page 584
●
Trace data: MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 584
●
Transducers: MMEMory:SELect[:ITEM]:TRANsducer:ALL on page 584
Example:
MMEM:SEL:NONE
MMEMory:SELect:CHANnel[:ITEM]:SCData <State>
MMEMory:SELect[:ITEM]:SCData <State>
This command includes or excludes source calibration data for an optional internal
generator when storing or loading a configuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:SCD ON
Adds the source calibration data to the list of data subsets.
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram <State>
MMEMory:SELect:CHANnel[:ITEM]:SGRam <State>
Common instrument commands