R&S ZNL Series User Manual

Command reference
R&S
®
ZNL/ZNLE
838User Manual 1178.5966.02 ─ 20
HCOPy:PAGE:ORIentation <Orientation>
Defines the orientation of the printed page. Switching between LANDscape and
PORTrait rotates the hardcopy result by 90 degrees. No other settings are changed.
Parameters:
<Orientation> LANDscape | PORTrait
LANDscape - long edge of the paper is the top of the page.
PORTrait - short edge of the paper is the top of the page.
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:PAGE:ORI LAND; :HCOP
Select landscape page orientation and start printing.
HCOPy:PAGE:WINDow <PrintDiagram>
Defines how the diagrams shall be printed (using HCOPy[:IMMediate].
Parameters:
<PrintDiagram> ALL | SINGle | ACTive | HARDcopy | NONE
ALL - all diagrams are printed on one page.
SINGle - one diagram per page.
ACTive - print only active diagram.
HARDcopy - print a screenshot of the diagram area, preserving
layout and colors ("real screenshot")
NONE - print no diagram at all.
*RST: n/a (*RST does not affect the printer configuration)
Example:
HCOP:PAGE:WIND SING; :HCOP
Select one diagram per page and start printing.
11.5.2.8 INITiate commands
The INITiate... commands control the initiation of the trigger system and define
the scope of the triggered measurement.
INITiate<Ch>:CONTinuous..............................................................................................838
INITiate:CONTinuous:ALL...............................................................................................839
INITiate[:IMMediate]:ALL.................................................................................................840
INITiate<Ch>[:IMMediate][:DUMMy].................................................................................840
INITiate<Ch>[:IMMediate]:SCOPe................................................................................... 841
INITiate<Ch>:CONTinuous <Boolean>
Qualifies whether the analyzer measures in single sweep or in continuous sweep
mode.
Suffix:
<Ch>
.
Channel number.
VNA command reference

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English