R&S ZNL Series - Page 845

Command reference
R&S
®
ZNL/ZNLE
845User Manual 1178.5966.02 ─ 20
Query parameters:
<CalKitFile> Path to the cal kit file, either absolute or relative to the current
directory (see MMEMory:CDIRectory)
<Detail> CONNector | LABel | NAME | GENDer
If specified, the command only returns the corresponding prop-
erty
Return values:
<ConnectorType>
<CalKitName>
<KitLabel>
<Gender> 1: has a gender
0: doesn't have a gender
Usage: Query only
MMEMory:DELete:CORRection
<CalGroupName>
Deletes a system error correction data set stored in the cal pool (cal group file).
Setting parameters:
<CalGroupName> String parameter to specify the name of the cal group file to be
deleted. Cal group files must have the extension *.cal. The
directory path must not be specified; the analyzer always uses
the default cal pool directory
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\
Calibration\Data.
Example: See MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Pool / Delete from Pool" on page 524
MMEMory:LOAD:CABLe <InputDir>
Loads Distance to Fault (DtF) cable type files (*.rsc) from the specified input direc-
tory.
Cable types are loaded "by name", overwriting user-defined cable types of the same
name. Predefined cable types of the same name will not be overwritten.
Setting parameters:
<InputDir> Input Directory
VNA command reference