R&S ZNL Series - Page 891

Command reference
R&S
®
ZNL/ZNLE
891User Manual 1178.5966.02 ─ 20
The delay parameter is returned according to the selected <DelayMode>; see
Table 11-15.
Query parameters:
<ConnectorType> Name of the connector type. Use [SENSe<Ch>:
]CORRection:CONNection:CATalog? to query connector
names.
<CalKitName> String parameter containing the name of the calibration kit. See
"Cal kit naming conventions " under [SENSe:]CORRection:
CKIT:<ConnType>:LSELect.
<KitLabel> String parameter containing the label of the calibration kit, usu-
ally the serial number.
<StandardType> MMTHrough | MFTHrough | FFTHrough | MMLine | MMLine1 |
MMLine2 | MMLine3 | MFLine | MFLine1 | MFLine2 | MFLine3 |
FFLine | FFLine1 | FFLine2 | FFLine3 | MMATten | MFATten |
FFATten | MMSNetwork | MFSNetwork | FFSNetwork | MOPen |
FOPen | MSHort | FSHort | MOSHort | MOSHort1 | MOSHort2 |
MOSHort3 | FOSHort | FOSHort1 | FOSHort2 | FOSHort3 |
MREFlect | FREFlect | MMTCh | FMTCh | MSMatch | FSMatch
Standard type; see Table 11-16
<DelayMode> DELay | ELENgth
ELENgth (default) – ZVR compatible modelling
DELay – Keysight modelling
<Port1>[, <Port2>] Optional port restriction: one port number for one port standards,
two port numbers for two port standards
Usage: Query only
[SENSe:]CORRection:CKIT... with Labels
The following [SENSe:]CORRection:CKIT... commands identify the calibration kit
to be used by a combination of its <CalkitName> and <CalkitLabel>. Typically, the
serial number of the calibration kit serves as a calibration kit label. Due to their different
labels, the analyzer can handle several calibration kits with identical names.
[SENSe:]CORRection:CKIT:LCATalog?............................................................................ 892
[SENSe:]CORRection:CKIT:LDELete............................................................................... 892
[SENSe:]CORRection:CKIT:LLABel................................................................................. 892
[SENSe:]CORRection:CKIT:LSELect................................................................................893
[SENSe:]CORRection:CKIT:<ConnType>:LSELect............................................................ 894
[SENSe:]CORRection:CKIT:STANdard:LCATalog?.............................................................895
[SENSe:]CORRection:CKIT:<StandardType>:WLABel....................................................... 895
[SENSe:]CORRection:CKIT:<OnePortStandardType>:WLABel:SDATa?...............................895
[SENSe:]CORRection:CKIT:<TwoPortStandard>:WLABel:SDATa?...................................... 896
VNA command reference