R&S ZVB - Page 1052

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1037
ensures a frequency spacing of 1 Hz.
<transmission>
Transmission coefficient
Range [def. unit]
–300 dB to +200 dB [dB]
*RST values
n/a
SCPI, Command
Types
Device-specific, command or query. The query returns the frequency and
transmission coefficient no. <List_No>.
Example:
See SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:CALibration
SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:DELete<List_No>:ALL
Clears the power loss list.
<Ch>
Calibrated channel number. This parameter is ignored; the transmission
coefficient settings are valid for all channels.
<Pt>
Calibrated port number. This parameter is ignored; the transmission coefficient
settings are valid for all sources.
<List_no>
Number of point in the list. This suffix is ignored; the command deletes all points.
*RST values
n/a
SCPI,
Command
Types
Device-specific, no query.
Example:
See SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:CALibration
SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:DELete<List_No>[:DUMMy]
Deletes a single point no. <List_No> in the power loss list.
<Ch>
Calibrated channel number. This parameter is ignored; the transmission
coefficient settings are valid for all channels.
<Pt>
Calibrated port number. This parameter is ignored; the transmission coefficient
settings are valid for all sources.
<List_no>
Number of point in the list.
*RST values
n/a
SCPI,
Command
Types
Device-specific, no query.
Example:
See SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:CALibration
SOURce<Ch>:POWer<Pt>:CORRection:TCOefficient:FEED '<trace_name>'
Selects a trace which provides the points for the power loss list.
<Ch>
Calibrated channel number. This parameter is ignored; the transmission
coefficient settings are valid for all channels.