R&S ZVB - Page 1081

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1066
SCPI, Command Types
Confirmed, command or query
Example:
SYST:KLOCk ON
Lock the local keys.
SYSTem:LANGuage '<Language>'
Specifies the Remote Language for the analyzer.
'<Language>'
Command syntax for the analyzer, string variable:
'SCPI' - R&S ZVA-specific command set: the analyzer supports all commands
described in this help system
'PNA' | 'HP8510' | 'HP8720' | 'HP8753' | 'ANRI' ... - Compatibility with network
analyzers from other manufacturers.
*RST value
SCPI
SCPI, Command
Types
Device-specific, command or query
Example:
SYST:LANG 'PNA'
Select a PNA-compatible command set.
SYSTem:LOGGing:REMote[:STATe] <Boolean>
Enables logging of all remote control commands transferred to the analyzer.
<Boolean>
ON - Command sequence stored to file 'C:\Program
Files\Rohde&Schwarz\Network Analyzer\RemoteLog\NWARemote.log'
OFF - Command sequence not logged
*RST value
– (the function is not affected by *RST)
SCPI,
Command
Types
Device-specific, command or query.
Example:
SYST:LOGG:REM ON
Enable remote logging. The log file 'C:\Program Files\Rohde&Schwarz\Network
Analyzer\RemoteLog\NWARemote.log'' is fixed and does not have to be specified.
SYSTem:PASSword[:CENable] '<password>'
Sends a password to the analyzer enabling a class of service functions to function (Command
ENable). Service functions are activated with the commands of the DIAGnostic system and should be
used by a R&S service representative only. Refer to the service manual for more information.
'<password>'
Case-sensitive string variable. Sending an invalid password generates error -
221, (settings conflict).