R&S ZVB - Page 1086

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1071
Response: 12,0,0 – it is precisely 12 pm.
SYSTem:TRESet[:STATe] <Boolean>
Defines the restart behavior of the instrument.
<Boolean>
OFF - Keep previous measurement
ON - Set all traces to 0
*RST value
n/a (a reset does not change the restart behavior)
SCPI, Command Types
Device-specific, command or query.
Example:
SYST:TRES ON
Define the sweep restart behavior such that trace values are set to 0.
SYSTem:USER:DISPlay:TITLe '<title>'
Defines a title for the remote display.
'<title>'
Title (string variable). \n in the string starts a new line; see example
*RST value
– (*RST does not affect the title)
SCPI, Command
Types
Device-specific, command or query.
Example:
SYST:USER:DISP:TITL 'Rohde & Schwarz \n Vector Network Analyzer \n
Remote test running'
Define a title for the remote display. The title is displayed in three lines; \n is
not displayed.
SYSTem:USER:KEY <ukey_no>[, '<ukey_name>']
Labels a user-defined key in the remote display. In the query form the command returns whether or not a
user-defined key was used.
<ukey_no>
Number of the user key
Range [def. unit]
0 – Delete all user keys and restore the default keys (Go to Local, Display Off)
1 to 8 – user key numbers
*RST value
0
'<ukey_name>'
Label for user key no. 1 to 8 (string variable)
*RST value
'' (empty string)
SCPI, Command
Types
Device-specific, command or query.
Example:
SYST:USER:KEY 1, 'User S11'
Define a user key no. 1 labeled S11. The user key is only labeled, no