R&S ZVB - Page 1085

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 1070
SYSTem:SHUTdown
Switches the analyzer to the standby state.
*RST value
–
SCPI, Command Types
Device-specific, no query
Example:
SYST:SHUT
Switch the network analyzer to standby state.
SYSTem:SOUNd:ALARm[:STATe] <Boolean>
Switches alarm sounds on or off.
<Boolean>
OFF - Alarm sounds switched off
ON - Alarm sounds switched on
*RST value
ON
SCPI, Command Types
Device-specific, command or query.
Example:
SYST:SOUN:ALAR OFF; STAT OFF
Switch alarm and status sounds off.
SYSTem:SOUNd:STATus[:STATe] <Boolean>
Switches status sounds on or off.
<Boolean>
OFF - Status sounds switched off
ON - Status sounds switched on
*RST value
ON
SCPI, Command Types
Device-specific, command or query.
Example:
See SYSTem:SOUNd:ALARm[:STATe]
SYSTem:TIME <Hours>, <Minutes>, <Seconds>
Queries or defines the instrument's current time setting. The setting command requires administrator
rights.
<Hours>
<Minutes>
<Seconds>
0 to 23
0 to 59
0 to 59
*RST value
n/a
SCPI, Command Types
Confirmed, command or query
Example:
SYSTem:TIME?