R&S ZVB - Page 690

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 675
SCPI, Command
Types
Device-specific, with query (returns the name of the active trace).
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the input reflection
coefficient S11. The trace is the active trace in channel 4.
CALC4:PAR:SDEF 'Ch4Tr2', 'S22'
Create another trace named Ch4Tr2 to measure the output reflection coefficient
S22. Again this new trace becomes the active trace in channel 4.
CALC4:PAR:SEL 'Ch4Tr1'
Select the first trace Ch4Tr1 as the active trace.
CALC4:FORM MLIN
Calculate the magnitude of S11 and display it in a linearly scaled Cartesian
diagram.
CALCulate<Chn>:PHOLd
This subsystem controls the max hold (peak hold) function.
CALCulate<Chn>:PHOLd MIN | MAX | OFF
Enables, disables, or restarts the max hold and the min hold functions.
<Chn>
Channel number used to identify the active trace.
Parameters
MIN - enable the min hold function.
MAX - enable the max hold function.
OFF - disable the max hold or min hold function.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
Example:
*RST; :CALC:PHOL MAX
Reset the instrument and enable the max hold function.
CALC:PHOL OFF; PHOL MAX
Restart max hold.
CALCulate<Chn>:RIPPle...
This subsystem defines the ripple limits and controls the ripple check.
CALCulate<Chn>:RIPPle:CONTrol:DOMain FLIN | FLOG | FSEG | FSINgle | TLIN |