R&S ZVB - Page 771

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 756
HCOPy[:IMMediate]
Initializes the print according to the current HCOPy... configuration.
*RST value
–
SCPI, Command Types
Confirmed, no query.
Example:
HCOP:DEST '<Printer_name>'
Select the printer for the output of screen data.
HCOP
Start printing.
HCOPy:ITEM:ALL
Selects the complete screen contents to be printed, including the logo (HCOPy:ITEM:LOGO), time
(HCOPy:ITEM:TIME), and the marker list (HCOPy:ITEM:MLISt).
*RST value
After a reset, the complete information is printed; see commands for logo,
time, marker list and settings.
SCPI, Command
Types
Confirmed, no query.
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP
Start printing.
HCOPy:ITEM:LOGO[:STATe] <Boolean>
Qualifies whether or not the printed hardcopy contains the logo. The default R&S logo (file Logo.gif) is
stored in the Resources\Images subdirectory of the NWA program directory and can be replaced by
another logo.
This command is valid for printed hardcopies. If you print to a file (HCOPy:DESTination 'MMEM'),
use HCOPy:MITem:LOGO[:STATe].
<Boolean>
ON | OFF - Logo is included or excluded.
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:LOGO ON; :HCOP
Include the logo in the printed output and start