R&S ZVB - Page 772

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 757
printing.
HCOPy:ITEM:MLISt[:STATe] <Boolean>
Qualifies whether or not the printed output contains the information in the marker info field (marker list).
<Boolean>
ON | OFF - Marker list is included or excluded.
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:MLISt ON; :HCOP
Include the marker list in the printed output and start
printing.
HCOPy:ITEM:TIME[:STATe] <Boolean>
Qualifies whether or not the printed hardcopy contains the current date and time.
This command is valid for printed hardcopies. If you print to a file (HCOPy:DESTination 'MMEM'),
use HCOPy:MITem:TIME[:STATe].
<Boolean>
ON | OFF - Date and time is included or excluded.
*RST value
n/a (*RST does not affect the printer configuration)
SCPI, Command
Types
Device-specific, command or query
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:TIME ON; :HCOP
Include the data and time in the printed output and
start printing .
HCOPy:MITem:LOGO[:STATe] <Boolean>
Qualifies whether or not the printed file contains the logo. The default R&S logo (file Logo.gif) is stored in
the Resources\Images subdirectory of the NWA program directory and can be replaced by another logo.
This command is valid for screen content which is printed to a file (HCOPy:DESTination 'MMEM').
To configure hardcopies, use HCOPy:ITEM:LOGO[:STATe].
<Boolean>
ON | OFF - Logo is included or excluded.
*RST value
n/a (*RST does not affect the printer configuration)