R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 783
MMEMory:LOAD:VNETworks<Ch>:BALanced:EMBedding<Log_pt> '<file_name>',
PMAin | PSECondary[, IPORts]
Loads data from a specified Touchstone file defining a balanced port circuit model for embedding. Select a
balanced port circuit model involving file import before using the command.
String parameter to specify the name and directory of the loaded Touchstone file.
The balanced port circuit models STSL | STSC | SLST | SCST require two 2-
port (*.s2p) files, to be assigned to the different ports PMAin and PSECondary; the
FIMPort model requires a single 4-port (*.s4p) file but no additional port
assignment.
If no path is specified the analyzer searches the current directory, to be queried
with MMEMory:CDIRectory?.
Port assignment for two 2-port (*.s2p) files:
PMAin – Port 1
PSECondary – Port 2
The ports must be specified for the import of 2-port (*.s2p) files; they must be
omitted for 4-port (*.s4p) files.
Interchange port numbers of loaded *.s2p file. If the parameter is omitted, the port
numbers are not interchanged. The parameter must not be used for 4-port files.
Device-specific, no query.
*RST; SOUR:LPOR1 1,2; LPOR2 3,4
Define a balanced port configuration.
CALC:TRAN:VNET:BAL:EMB:TND STSL
Select the Serial .s2p data, shunt L circuit model.
MMEM:LOAD:VNET:BAL:EMB2 'C:\Program
Files\Rohde&Schwarz\Network Analyzer\VNET\Test.s2p', PMA
Load a Touchstone file and assign it to logical port no. 2.
MMEMory:LOAD:VNETworks<Ch>:GLOop:DEEMbedding '<file_name>'
Loads data from a specified one-port (*.s1p) Touchstone file defining a ground loop circuit model for
deembedding. Select the ground loop circuit model involving file import (FIMPort) before using the
command.
String parameter to specify the name and directory of the loaded Touchstone file.
If no path is specified the analyzer searches the current directory, to be queried
with MMEMory:CDIRectory?.
To Next Page
