R&S ZVB - Page 800

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 785
assignment.
If no path is specified the analyzer searches the current directory, to be queried with
MMEMory:CDIRectory?.
Parameters
Port assignment for two 2-port (*.s2p) files:
PMAin – Port 1
PSECondary – Port 2
The ports must be specified for the import of 2-port (*.s2p) files; they must be
omitted for 4-port (*.s4p) files.
[IPORts]
Interchange port numbers of loaded *.s2p file. If the parameter is omitted, the port
numbers are not interchanged. The parameter must not be used for 4-port files.
*RST value
–
SCPI,
Command
Types
Device-specific, no query.
Example:
*RST; :CALC:TRAN:VNET:PPA:DEEM:DEF 1,2,3,4
Define a port pair configuration with two port pairs (<List_idx> = 1 or 2).
CALC:TRAN:VNET:PPA:DEEM2:TND STSL
Select the Serial .s2p data, shunt L circuit mode for port pair no. 2.
MMEM:LOAD:VNET:PPA:DEEM2 'C:\Program Files\Rohde&Schwarz\Network Analyzer\Traces\Test.s2p',
PMA
Load a Touchstone file and assign it to port pair no. 2.
MMEMory:LOAD:VNETworks<Ch>:PPAir:EMBedding<List_idx> '<file_name>',
PMAin | PSECondary[, IPORts]
Loads data from a specified Touchstone file defining a balanced port circuit model for embedding. Select a
port pair with a circuit model involving file import before using the command.
<Ch>
Channel number
<List_idx>
Current number of a port pair in the list, defined via
CALCulate<Ch>:TRANsform:VNETworks:PPAir:EMBedding<List_idx>:DE
Fine
'<file_name>'
String parameter to specify the name and directory of the loaded Touchstone file.
The balanced port circuit models STSL | STSC | SLST | SCST require two 2-
port (*.s2p) files, to be assigned to the different ports PMAin and PSECondary; the
FIMPort model requires a single 4-port (*.s4p) file but no additional port
assignment.
If no path is specified the analyzer searches the current directory, to be queried with
MMEMory:CDIRectory?.
Parameters
Port assignment for two 2-port (*.s2p) files:
PMAin – Port 1
PSECondary – Port 2
The ports must be specified for the import of 2-port (*.s2p) files; they must be
omitted for 4-port (*.s4p) files.
[IPORts]
Interchange port numbers of loaded *.s2p file. If the parameter is omitted, the port
numbers are not interchanged. The parameter must not be used for 4-port files.