R&S ZVB - Page 805

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 790
Example:
See MMEMory:SETTings:RENorm:MODE
MMEMory:SETTings:RENorm:STATe <Boolean>
Enables or disables renormalization during Touchstone file export and import.
This setting is valid in explicit mode only (MMEMory:SETTings:RENorm:MODE EXPLicit).
<Boolean>
ON | OFF – enable or disable renormalization.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query
Example:
See MMEMory:SETTings:RENorm:MODE
MMEMory:STORe:CKIT '<ckit_name>', '<file_name>'
Stores the data of a calibration kit to a specified file. The calibration kit is identified by its name.
'<ckit_name>'
Name of a user-defined calibration kit available on the analyzer.
It is not possible to modify or store predefined or ideal kits.
'<file_name>'
String parameter to specify the name and directory of the cal kit file to be created.
The file is a NWA-specific cal kit file with the extension *.calkit. If no path is
specified the analyzer uses the current directory, to be queried with
MMEMory:CDIRectory?.
*RST value
–
SCPI,
Command
Types
Device-specific, no query.
Example:
MMEM:LOAD:CKIT 'C:\Program Files\Rohde&Schwarz\Network
Analyzer\Calibration\Kits\New_kit.calkit'
Load the previously created cal kit file New_kit.calkit from
the default cal kit directory.
... :MMEM:STOR:CKIT 'New_kit', 'C:\Program
Files\Rohde&Schwarz\Network
Analyzer\Calibration\Kits\New_kit.calkit'
Store the data for the user-defined cal kit New_kit and
overwrite the cal kit file New_kit.calkit.
MMEMory:STORe:CKIT:WLABel '<ckit_name>', '<ckit_label>', '<file_name>'
Stores the data of a calibration kit to a specified file. The calibration kit is identified by its name and label.