Remote Control
R&S
®
FSVA/FSV
621Operating Manual 1176.7510.02 ─ 09
If you change the horizontal position of the marker, so does the delta marker.
Suffix:
<n>
.
Selects the measurement window.
<m> 1
irrelevant
Parameters:
<State> ON | OFF
*RST: OFF
Example:
CALC:DELT:LINK ON
Manual operation: See "Link Mkr1 and Delta1" on page 283
CALCulate<n>:DELTamarker<m>:MODE <Mode>
This command selects the delta marker mode.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Parameters:
<Mode> ABSolute
Delta marker position in absolute terms.
RELative
Delta marker position in relation to a reference marker.
*RST: REL
Example:
CALC:DELT:MODE ABS
Absolute delta marker position.
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command positions the delta marker to the current trace maximum. If necessary,
the corresponding delta marker is activated first.
In "Spectrogram" mode, this command positions the specified delta marker on the cur-
rent peak level of the x-axis. The search is performed within the current frame. It does
not change the position of the deltamarker on the y-axis.
Suffix:
<n>
.
Selects the measurement window.
<m> Selects the marker.
Example:
CALC:DELT3:MAX
Sets delta marker 3 to the maximum value of the associated
trace.
Manual operation: See "Peak" on page 302
See "Marker Search Type" on page 306
Remote Control – Commands
To Next Page
Loading...
