Remote Control
R&S
®
FSVA/FSV
816Operating Manual 1176.7510.02 ─ 09
The suffixes are irrelevant.
Suffix:
<range>
.
1...20
range
Parameters:
<State> ON
The R&S FSVA/FSV stops after one range is swept and contin-
ues only if you confirm (a message box is displayed).
OFF
The R&S FSVA/FSV sweeps all ranges in one go.
*RST: OFF
Example:
LIST:RANG:BRE ON
Configures a stop after each range.
Manual operation: See "Stop After Sweep" on page 380
[SENSe:]LIST:RANGe<range>:COUNt
This command returns the number of defined ranges.
Suffix:
<range>
.
1...20
range
Example:
LIST:RANG:COUNt?
Returns the number of defined ranges.
[SENSe:]LIST:RANGe<range>:DELete
This command deletes the specified range. The range numbers are updated accord-
ingly. The reference range cannot be deleted. A minimum of three ranges is manda-
tory.
Suffix:
<range>
.
1...20
range
Example:
LIST:RANG4:DEL
Deletes range 4.
Manual operation: See "Delete Range" on page 381
[SENSe:]LIST:RANGe<range>:DETector <Detector>
This command sets the detector for the specified range. For details refer to "Detector"
on page 379.
Suffix:
<range>
.
1...20
range
Remote Control – Commands
To Next Page
Loading...
