Rohde & Schwarz FSVA - Page 972

Remote Control
R&S
®
FSVA/FSV
972Operating Manual 1176.7510.02 ─ 09
SYSTem:REVision[:STRing] <Name>
Sets the response to the REV? queryto the defined string (HP emulation only, see
Chapter 4.2.5, "GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and
8594E", on page 974).
Parameters:
<Name>
Example: Define the system language:
SYST:LANG '8563E'
Query the revision:
REV?
Response:
920528
Set the response to 'NewRevision':
SYST:REV:STR 'NewRevision'
Query the response:
SYST:REV:STR?
Response:
NewRevision
Manual operation:
See "REV String User" on page 183
SYSTem:RSW <State>
Controls a repeated sweep of the E1 and MKPK HI/HL HP model commands (for
details on the commands refer to Chapter 4.2.5, "GPIB Commands of HP Models
856xE, 8566A/B, 8568A/B and 8594E", on page 974). If the repeated sweep is OFF,
the marker is set without sweeping before.
This command is only available if a HP language is selected using SYSTem:LANGuage
.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
SYSTem:RSW ON
Usage: SCPI confirmed
Manual operation: See "Sweep Repeat (On/Off)" on page 182
SYSTem:SHUTdown
This command shuts down the instrument.
Usage:
Event
SYSTem:TIME <Time>
This command sets the internal clock. The sequence of entry is hour, minute, second.
Remote Control – Commands