Rohde & Schwarz R&S SMB100B - Page 310

Network operation and remote control
R&S
®
SMB100B
310User Manual 1178.3711.02 ─ 08
It comprises the following navigation entries.
● IP configuration..................................................................................................... 310
● Advanced config....................................................................................................310
● Ping client..............................................................................................................311
IP configuration
The "IP configuration" web page displays all mandatory LAN parameters and allows
their modification.
The "IP Address Mode" selects a configuration mode for the IP address of the instru-
ment. With static configuration, the entered IP address, subnet mask, and default gate-
way are used. With dynamic configuration, DHCP or dynamic link local addressing
(automatic IP) is used to obtain the instrument IP address.
Changing the LAN configuration
This function is password-protected. Unlock the protection level 1 to access it.
Note: We recommend that you change the default password before connecting the
instrument to a network.
How to:
●
"Changing the default user password of the instrument" on page 261.
●
"Changing the default security password" on page 261.
See Chapter 10.4.4, "Password management", on page 258.
Advanced config
The "Advanced Config" web page provides LAN settings that are not declared manda-
tory by the LXI standard.
LXI settings