Rohde & Schwarz R&S SMB100B - Page 469

Remote control commands
R&S
®
SMB100B
469User Manual 1178.3711.02 ─ 08
[:SOURce<hw>]:LFOutput<ch>:SHAPe:PULSe:PERiod <Period>
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
Parameters:
<Period> float
Range: 1E-6 to 100
Increment: 1E-8
*RST: 1E-3
Example: See Example"Configuring the LF generator" on page 462.
Manual operation: See "Period" on page 102
[:SOURce<hw>]:LFOutput<ch>:SHAPe:PULSe:WIDTh
<Width>
Sets the pulse width of the generated pulse.
Parameters:
<Width> float
Range: 1E-6 to 100
Increment: 1E-8
*RST: 5E-4
Example: See Example"Configuring the LF generator" on page 462.
Manual operation: See "Pulse Width" on page 102
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRAPeze:FALL <Fall>
Selects the fall time for the trapezoid shape of the LF generator.
Parameters:
<Fall> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 250E-6
Example: See Example"Configuring the LF generator" on page 462.
Manual operation: See "Trapezoid Rise / Fall" on page 103
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRAPeze:HIGH <High>
Sets the high time for the trapezoid signal of the LF generator.
Parameters:
<High> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 250E-6
SOURce subsystem