Rohde & Schwarz R&S SMB100B - Page 559

Remote control commands
R&S
®
SMB100B
559User Manual 1178.3711.02 ─ 08
STEReo:DIRect "EON-AFA= <PI>,<A>,<Freq#1>,<Freq#2>,..."
STEReo:DIRect? "EON-AFA,<PI>,<z>"
Enhanced Other Networks: Defines type A alternative frequencies for the EON with the
selected PI.
Parameters:
<PI> Range: 0000 to FFFF (ASCII coded hexadecimal num-
bers)
<Freq> xxx.x
Sets the alternative frequencies as ASCII coded decimal num-
bers.
If list <z> is not available, the response is ().
Note: For each Enhanced Other Network (EON), a maximum of
five type A alternative frequency lists can be created.
Range: 87.6 to 107.9
Setting parameters:
<A> N
New AF list
+
AF list to be added.
Query parameters:
<z> AF list to be read.
Range: 1 to 5
Example:
STEReo:DIRect "EON-AFA=1000,N,97.4,98.3"
Creates a type A alternative frequency list for the EON with
PI=1000. The new list contains the alternative frequencies 97.4
MHz and 98.3 MHz.
STEReo:DIRect? "EON-AFA,1000,1"
Queries the first type A alternative frequency list of the EON with
PI=1000.
Response: "97.4,98.3"
STEReo:DIRect "EON-AFB= <PI>,<A>,<Freq#1>,<Freq#2>,..."
STEReo:DIRect? "EON-AFB,<PI>,<z>"
Enhanced Other Networks: Defines type B alternative frequencies for the EON with the
selected PI.
Parameters:
<PI> Range: 0000 to FFFF (ASCII coded hexadecimal num-
bers)
Direct commands for the stereo/rds coder option R&S SMBB-B5