Rohde & Schwarz R&S SMB100B - Page 571

Remote control commands
R&S
®
SMB100B
571User Manual 1178.3711.02 ─ 08
3
Internal with LF generator
Example:
STEReo:DIRect "SRC=1"
Selects the external analog L and R inputs as source.
STEReo:DIRect? "STATUS"
Status request whether the encoder or the update loader program is being executed.
Return values:
<Status> ENC
Encoder program is running.
UPL
Update loader program is running.
Example:
STEReo:DIRect? "STATUS"
Response: "ENC"
Usage: Query only
STEReo:DIRect "STORE=<DataSet#>"
Saves data in the flash memory. All RDS-specific settings are stored in data set <Data-
Set#> of the flash memory.
Setting parameters:
<DataSet#> Range: 1 to 5
Example:
STEReo:DIRect "STORE=1"
Current setting are saved as data set 1.
Usage: Setting only
STEReo:DIRect "TA=<State>"
STEReo:DIRect? "TA"
(for documentation reasons only)
Sets or reads the traffic announcement flag.
This flag signals whether traffic information is being broadcast.
Use the command [:SOURce]:STEReo:RDS:TRAFfic:ANNouncement[:STATe]
instead.
Setting parameters:
<State> 0 | 1
Example:
STEReo:DIRect "TA=1"
Direct commands for the stereo/rds coder option R&S SMBB-B5