Troubleshooting and notifications
R&S
®
SMB100B
581User Manual 1178.3711.02 ─ 08
The "Versions/Options" dialog shows the version of the installed instrument firm-
ware, the hardware and software options, the data sheet and the software compo-
nents of the firmware. The BIOS version is also listed; firmware updates do not
update the BIOS version.
The remote commands required to query the hardware configuration are described in
Chapter 12.7, "DIAGnostic subsystem", on page 371.
Firmware
Shows the firmware version and the version of the software platform.
Note: Your instrument is delivered with the latest firmware version available.
You can download firmware updates and the "Release Notes" that describe the modifi-
cations and the firmware update procedure.
See www.rohde-schwarz.com/firmware/smb100b
Remote command:
n.a.
Downgrade Info
Shows downgrade information, like factory firmware version and minimum firmware
version to that the instrument can be downgraded.
Remote command:
n.a.
Show Open Source Acknowledgments
Accesses the list of the used open-source software packages and the corresponding
verbatim license texts.
LucasFonts RSCorpid EULA
Accesses copyright information on LucasFonts font type RSCorpid EULA.
Hardware Options/Software Options
The tables in the "Hardware" and "Software" tabs list the installed hardware and soft-
ware options.
"Option"
Short name of option
"Designation"
Name of option
"Expiration Date"
For regular options, "Permanent" is indicated in this column.
Remote command:
*OPT? on page 353
*IDN? on page 352
Versions
The "Versions" tab shows the versions of the technical specification of the
R&S SMB100B and of the software components that comprise the firmware.
"Package"
Name of the component.
Requesting instrument configuration and specifications
To Next Page
Loading...
