Maintenance, storage and disposal
R&S
®
SMB100B
599User Manual 1178.3711.02 ─ 08
Shut down
For at least one assembly "State = Done" and no pending assemblies, shuts the instru-
ment down to applies installed updates.
Remote command:
:SYSTem:SHUTdown on page 542
Update External Devices
This dialog shows the update options of external devices connected to the instrument.
Check For Updates ← Update External Devices
Check for updates of external devices.
Remote command:
n.a.
15.3.5 Delete temporary files
During signal processing, the R&S SMB100B creates and saves various temporary
files in a predefined directory on its non-volatile memory. This predefined directory is a
protected system directory you cannot access in the "File Manager", but you can
delete all temporary files saved there.
To achieve more free disc space on the internal memory
1. Select "System Config > Setup > Maintenance > Delete Temporary Files".
2. Select "Delete Temporary Files".
Deletes the content of the predefined directory.
Another way to achieve more free disc space on the internal memory is to use the Exe-
cute Factory Preset.
This function removes all temporary files, too, but also resets several parameters to
their factory preset values.
Remote command:
:SYSTem:FILes:TEMPorary:DELete on page 543
Performing maintenance tasks
To Next Page
Loading...
